| |
| HOW TO APPLY FLOOD SENTRY |
|
| Applying and removing the Flood Sentry seal is quick and simple, follow the 3 steps below for a trouble free, water tight fit! |
|
| Step 1 |
|
 |
Remove one seal at a time from the packaging.
Clean away any loose debris from around air brick.
Remove the adhesive protective strip from seal and firmly place Flood Sentry over air brick. |
|
| Step 2 |
|
 |
Ensure there are no gaps between the seal and brick surface. If there are any gaps, continue to firmly press the seal against the brick surface.
Flood Sentry seals can be overlaid on each other. |
|
| Step 3 |
|
 |
Only remove the seals when flood waters have receded.
To remove Flood Sentry seal's carefully peal from one corner.
Clean the vent with a stiff brush. |
|
|
|
